AneeMate oxygen bar: check your air after surfacing

In AneeMate build 0.1.5-ce, oxygen has its own bar, separate from stamina, and refills gradually after you surface. For a short trip into the water, plan where you will return before going farther out. Once you surface, watch the oxygen bar recover before deciding to go back in. The 6 November release report is the source for the display and refill change.
Where should you look after surfacing?
Look for the oxygen display and give it a moment to recover. If your next move is another trip underwater, the relevant question is how much oxygen is shown now. You can still check stamina when deciding what movement to attempt next. Keeping your attention on the correct bar is easier when you first try it in a place where you have time to look away from the scenery.
The useful habit is to treat surfacing as the beginning of recovery. The release notes say that the refill is gradual. They do not give a universal number of seconds for the refill or an exact amount of time you can spend underwater. You can see what the current display shows in your own build instead of timing your route against a number from another version.
Start with a shoreline you can read from the water
Pick a stretch of shore with an obvious return landmark. A light patch of rock or a bend in the bank can work. Stand where you can look back at it and know which direction would take you out. If you are also learning the camera, keep the camera setup unchanged for this first run so there is only one new thing to pay attention to.
Move a short distance from the bank and note where the oxygen bar is on screen. Turn back early. Surface and watch for the refill. Take your time to find the landmark again. The goal of this small practice route is to remember where to look during the next trip, when you might be deciding between following a path and returning to dry ground.
Model example: a route with two stops
Imagine that you can see a shallow inlet and a second spot farther around the corner. Begin with the inlet. Pick a return point you can identify from the water, do one short pass and surface where the bank is visible. If you are still orienting yourself when you come up, wait there and look at the oxygen bar. Continue only when the route and the recovery display both make sense to you.
On another pass, try turning back a little sooner. Notice whether that leaves more time to identify the return point. This is an example of a player practice route, so there is no claim about a specific island location, item, creature or reward waiting in the inlet.
You can use the same approach on routes involving a glider. First choose a dry landing you can recognize. If you end up in water, reorient around the bank and use the oxygen display when it applies. Our gliding route guide covers how to make the landing choice before chasing another objective.
What if the display looks different?
Check the installed build and the situation you are observing. The separate bar and gradual recovery are documented for 0.1.5-ce. Write down whether you were entering water, remaining submerged, surfacing or returning to land. Those moments are useful when describing a HUD issue because they show the sequence the display had to represent.
If you can reproduce the behaviour, repeat a short pass from the same bank. Keep the sequence and your camera approach as similar as you can. If it occurs again, include the build and the steps in a short report. The AneeMate testing feedback guide shows how to turn a brief observation into something the team can investigate.
Does oxygen refill the moment you surface?
The release report describes gradual refill after surfacing. Give the meter time to show how much oxygen is available before your next trip. The report does not specify an exact refill interval.
How should I plan a longer route?
Choose a visible return or exit point first, then try smaller stretches you can judge from the current oxygen display. Use the beacons and map route guide for the wider return plan, and keep the first water segment close enough to your chosen landmark that you can recognize it when you surface. You can check the current PC listing on the Epic Games Store.